Brady Material B407 Technical Data Sheet


	Technical Data Sheet

BRADY B-407 TRANSLUCENT MATTE POLYOLEFIN LABEL STOCK

TDS No. B-407

Effective Date: 11-Oct-2005

Description:

GENERAL
Print Technology: Thermal transfer
Materials Type: Translucent polyolefin
Finish: Matte
Adhesive: Permanent acrylic
Liner: Polypropylene coated natural paper release liner

APPLICATIONS
B-407 is recommended for general purpose label applications that require a clear thermal transfer printable material. B-407 can also be used as a thermal transfer printable overlaminate. B-407 is not recommended for outdoor use.

RECOMMENDED RIBBONS
Brady series R4900 and R6200 black
Brady series R4400 white

REGULATORY/AGENCY APPROVALS
Based on the results of testing using recognized analytical methods performed by a third party, independent laboratory, B-407 is RoHS compliant to the current TAG MCV proposal to the EU Commission Directive 2002/95/(RoHS) for cadmium (<100 ppm), lead (<1000 ppm), hexavalent chromium (<1000 ppm), mercury (<1000 ppm), polybrominated biphenyls (PBBs < 1000 ppm), and polybrominated diphenyl ethers (PBDE's <1000 ppm).

Details:

PHYSICAL PROPERTIES	TEST METHODS	AVERAGE RESULTS
Thickness	ASTM D 1000 -Substrate -Adhesive -Total	0.0036 inch (0.091 mm) 0.0009 inch (0.023 mm) 0.0045 inch (0.114 mm)
Adhesion to: -Stainless Steel -Smooth ABS -Polypropylene	ASTM D 1000 20 minute dwell 24 hour dwell 20 minute dwell 24 hour dwell 20 minute dwell 24 hour dwell	36 oz/in (40 N/100 mm) 44 oz/in (47 N/100 mm) 36 oz/in (40 N/100 mm) 39 oz/in (43 N/100 mm) 29 oz/in (32 N/100 mm) 33 oz/in (36 N/100 mm)
Tack	ASTM D 2979 Polyken™ Probe Tack 1 second dwell	24 oz (669 g)

Performance properties tested on B-407 printed with Series R4900 and R6200 ribbons and a BradyPrinter™ THT Model 300X thermal transfer printer. Printed samples of B-407 were laminated to aluminum and allowed to dwell 24 hours before exposure to the indicated environmental conditions.

PERFORMANCE PROPERTIES	TEST METHOD	TYPICAL RESULTS
Short Term High Service Temperature	5 minutes at 212°F (100°C)	No visible effect to label at 100°C. Label shrinkage and adhesive blistering at temperatures higher than 100ºC.
Long Term High Service Temperature	30 days at 194°F (90°C)	No visible effect to label at 80°C. Adhesive blistering observed at 90°C.
Low Service Temperature	30 days at -94°F (70°C)	No visible effect
Humidity Resistance	30 days at 100°F (37°C) and 95% R.H.	No visible effect
Weatherability*	ASTM G155, Cycle 1 30 days in Xenon Arc Weatherometer	Label became severely cracked and brittle.
Salt Fog Resistance	ASTM B 117 30 days in 5% salt fog solution chamber	No visible effect
Abrasion Resistance	Taber Abraser, CS-10 grinding wheels, 500 g/arm (Fed. Std. 191A, Method 5306)	Print still legible at 150 cycles with the R4900 and R6200 ribbons.

*B-407 is not recommended for long-term outdoor use.

PERFORMANCE PROPERTY

CHEMICAL RESISTANCE

Samples printed with Series R4900 and R6200 ribbons. Samples laminated to aluminum panels and allowed to dwell 24 hours prior to testing. Test was conducted at room temperature except where noted. Testing consisted of 5 cycles of 10 minute immersions in the specified test fluid followed by a 30 minute recovery period. After final immersion, samples rubbed 10 times with cotton swab saturated with test fluid.

Product testing, customer feedback, and history of similar products, support a customerperformance expectation of at leasttwo years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80 degrees F and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use, in their actual applications.

Trademarks:
Alconox® is a registered trademark of Alconox Co.
BradyPrinter™ is a trademark of Brady Worldwide, Inc.
Northwoods™ is a trademark of the Superior Chemical Corporation.
Polyken™ is a trademark of Testing Machines Inc.
Skydrol® is a registered trademark of the Monsanto Company
ASTM: American Society for Testing and Materials (U.S.A.)
S. I.: International System of Units
All S.I. Units (metric) are mathematically derived from the U.S. Conventional
Units.

Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.

WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289

Product, Facility, & Safety Identification Solutions

Technical Data Sheet

BRADY B-407 TRANSLUCENT MATTE POLYOLEFIN LABEL STOCK