Brady Material B515 Technical Data Sheet


	Technical Data Sheet

BRADY B-515 STATIC CLING VINYL

TDS No. B-515

Effective Date: 18-Nov-2002

Description:

Brady's B-515 Static Cling Vinyl is designed for use in cartridge form with the GlobalMark™ printer.

Details:

Use:
Brady B-515 is used for temporary, removable indoor signage when applied to most clean, smooth surfaces.

Substrate Type:
Static cling vinyl

Standard Material Colors:
Clear

Standard Legend Colors:
Black, White, Red, Blue, Green, Magenta, Yellow, Orange, Process Cyan, Process Yellow, Process Magenta

Thickness (PSTC-33):
0.006 in. (0.15 mm)

Abrasion Resistance (Method 5306 of U.S. Federal Test Method Std. No. 191A):
CS-10 wheels, 250 g wts.
The printed legend withstands up to 800 cycles.

Minimum Application Temperature:
50°F (10°C)

Service Temperature:
-40°F to 158°F (-40°C to 70°C)

Average Outdoor Durability:
Not recommended for outdoor use.

Chemical Resistance:

REAGENT	RUB TEST
30% Sulfuric Acid	NE
10% Sulfuric Acid	NE
30% Hydrochloric Acid	NE
10% Hydrochloric Acid	NE
Glacial Acetic Acid	F
5% Acetic Acid	NE
50% Sodium Hydroxide	NE
10% Sodium Hydroxide	NE
10% Ammonia	NE
5% Sodium Hypochlorite	NE
Methyl Ethyl Ketone	F
Acetone	F
Toluene	F
1,1,1-Trichloroethane	F
Methanol	NE
Isopropyl Alcohol	NE
Heptane	NE
Mineral Spirits	NE
Turpentine	NE
Kerosene	NE
Diesel Fuel	NE
Gasoline	NE
ASTM #3 Oil	NE
SAE 20 Oil	NE
10% Sodium Chloride	NE
Alconox®	NE
Water	NE

NE = No Effect
F = Failed (affected Sample)
Rub Test: Rubbed sample for 1 minute with swab soaked in reagent.

Shelf Life:
Maximum of 6 months at 70°F (21°C) and 40% to 50% R.H. prior to printing

Trademarks:
Alconox® is a registered trademark of Alconox Co.
GlobalMark™ is a trademark of Brady Worldwide, Inc.
Signmark® is a registered trademark of Brady Worldwide, Inc.
ASTM: American Society for Testing and Materials (U.S.A.)
Fed. Spec.: United States Federal Specification (U.S.A.)
PSTC: Pressure Sensitive Tape Council (U.S.A.)
SAE: Society of Automotive Engineers (U.S.A.)

Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.

WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289

Product, Facility, & Safety Identification Solutions

Technical Data Sheet

BRADY B-515 STATIC CLING VINYL