back to last screen


Technical Data Sheet

BRADY B-624 MATTE POLYESTER LABEL STOCK

TDS No. B-624
Effective Date: 21-Feb-2000

Description:
Brady B-624 is a polyester film with a matte printable topcoat and a rubber based pressure sensitive adhesive.

Brady B-624 is used in applications requiring a durable dot-matrix printable or write-on label. The Brady Series 2000 and 5000 ribbons are recommended for dot matrix printing of B-624.

Brady B-624 exhibits good adhesion to many metals and other types of surfaces, including textured surfaces and low surface energy plastics. B-624 is available in white or yellow.


Details:


PHYSICAL PROPERTIES
TEST METHODS
AVERAGE RESULTS
Thickness ASTM D 1000
-Topcoat
-Film
-Adhesive
-Total
 
0.0007 inch (0.017 mm)
0.0020 inch (0.051 mm)
0.0018 inch (0.046 mm)
0.0045 inch (0.114 mm)
Adhesion to:
-Stainless Steel


-Textured ABS


-Polypropylene		 ASTM D 1000
20 minute dwell
24 hour dwell

20 minute dwell
24 hour dwell

20 minute dwell
24 hour dwell
 
55 oz/in (60 N/100 mm)
65 oz/in (71 N/100 mm)

30 oz/in (33 N/100 mm)
35 oz/in (38 N/100 mm)

50 oz/in (55 N/100 mm)
60 oz/in (66 N/100 mm)
Tack ASTM D 2979
Polyken™ Probe Tack
1 second dwell
 
42 oz (1200 g)
Application Temperature Lowest application temperature to stainless steel.
 
50°F ( 10°C)
The following testing is performed with the B-624 printed with the Brady Series 2000 and 5000 ribbons and laminated to aluminum panels. All samples allowed to dwell 24 hours prior to testing.

PERFORMANCE PROPERTIES
TEST METHODS
TYPICAL RESULTS
High Service Temperature 30 days at 248°F (120°C) Very slight topcoat discoloration at 120°C. No visible effect to Series 2000 or 5000 print. No discoloration at 100°C; label severely discolored but functional at 160°C.
Low Service Temperature 30 days at -40°F (-40°C) No visible effect
Humidity Resistance 30 days at 100°F (37°C), 95% R.H. No visible effect
UV Light Resistance 30 days in UV Sunlighter™ 100 Slight topcoat yellowing. Slig ht Series 2000 or 5000 print fade
Weatherability ASTM G155, Cycle 1
30 days in Xenon Arc Weatherometer		 Slight topcoat discoloration. Slight Series 2000 or 5000 print fade.
Abrasion Resistance Taber Abraser, CS-10 grinding wheels, 250 g/arm (Fed. Std. 191A, Method 5306) Series 2000 and 5000 print illegible after 100 cycles.
PERFORMANCE PROPERTY
SOLVENT RESISTANCE
Samples were printed with Series 2000 and 5000 ribbons, laminated to aluminum panels, and dwelled 24 hours prior to test. Testing consisted of 5 cycles of 10 minute immersions in the specified chemicals followed by 30 minute recovery periods. After the final immersion the samples were rubbed immediately 10 times with cotton swabs saturated in test fluids. Testing was conducted at room temperature.

CHEMICAL REAGENT
SUBJECTIVE OBSERVATION OF VISUAL CHANGE
APPEARANCE OF TAPE
APPEARANCE OF
SERIES 2000 PRINT
APPEARANCE OF
SERIES 5000 PRINT
Methyl Ethyl Ketone Slight adhesive ooze, topcoat damaged when rubbed Print removed when rubbed Print removed when rubbed
1,1,1-Trichloroethane Slight adhesive ooze, topcoat damaged when rubbed. Print removed when rubbed Print removed when rubbed
Toluene Slight adhesive ooze Print fade when rubbed Print fade when rubbed
Isopropyl Alcohol No visible effect Print fade when rubbed Print fade when rubbed
Mineral Spirits Slight adhesive ooze No visible effect No visible effect
JP-8 Jet Fuel Slight adhesive ooze No visible effect No visible effect
SAE 20 WT Oil No visible effect No visible effect No visible effect
Mil 5606 Oil Topcoat stained red No visible effect No visible effect
Speedi Kut Cutting Oil 332 No visible effect No visible effect No visible effect
Gasoline Slight adhesive ooze No visible effect No visible effect
Rust Veto® 377 No visible effect No visible effect No visible effect
Skydrol® 500B-4 Topcoat softened Print removed when rubbed Print removed when rubbed
Super Agitene® No visible effect Slight print fade when rubbed No visible effect
Deionized Water No visible effect No visible effect No visible effect
3% Alconox® Detergent No visible effect No visible effect No visible effect
10% Sulfuric Acid Solution No visible effect No visible effect No visible effect
Northwoods™ Buzz Saw Citrus Degreaser Topcoat damaged when rubbed Print removed when rubbed Print removed when rubbed

Product testing, customer feedback, and history of similar products, support a customerperformance expectation of at leasttwo years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80 degrees F and 60% RH . We are confident that our product will perform well beyond this time frame. However, it remains the responsibility of the user to assess the risk of using such product. We encourage customers to develop functional testing protocols that will qualify a product's fitness for use, in their actual applications.





Trademarks:
Alconox® is a registered trademark of Alconox Co.
Northwoods™ is a trademark of the Superior Chemical Corporation.
Polyken™ is a trademark of Testing Machines Inc.
Rust Veto® is a registered trademark of the E.F. Houghton & Co.
Skydrol® is a registered trademark of the Monsanto Company
Sunlighter™ is a trademark of the Test Lab Apparatus Company
Super Agitene® is a registered trademark of Graymills Corporation
ASTM: American Society for Testing and Materials (U.S.A.)
SAE: Society of Automotive Engineers (U.S.A.)
All S.I. Units (metric) are mathematically derived from the U.S. Conventional
Units.

Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.


WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

Copyright 2007 Brady Worldwide, Inc. | All Rights Reserved
Material may not be reproduced or distributed in any form without written permission.

Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289
Email This Page
Copyright 2009 Brady Worldwide, Inc.