back to last screen


Technical Data Sheet

BRADY B-936 FLUORESCENT VINYL FILM

TDS No. B-936
Effective Date: 05-Jun-2001

Description:
Brady B-936 is a fluorescent vinyl with pressure sensitive adhesive designed for use with the GraphicsPro™ Label & Sign Creator LC-100C cutter.


Details:


Use:
Brady B-936 is used for general indoor labeling.

Substrate Type:
Vinyl film

Standard Material Color:
Fluorescent yellow

Thickness (PSTC-33):
Total: 0.0079 in. (0.200mm)

Tensile Strength (PSTC-31):
Break: 60 lb/in. (1100 N/100mm)

Elongation (PSTC-31):
Break: 120%

Adhesive Properties:
Adhesion to Steel (PSTC-1)
15 Minute Dwell (Avg.) -- 80 oz/in. (87 N/100mm)
Ultimate Dwell (72 Hrs.) (Avg.) -- 150 oz/in. (160 N/100mm)
Tack (ASTM D 2979) (Avg.) -- 1800 g (18 N)
Drop Shear (PSTC-7) (Avg.) -- 0.5 Hrs.

Abrasion Resistance (Method 5306 of U.S. Federal Test Method Std. No. 191A):
CS-17 wheels, 500 g wts.
Substrate withstands up to 10,000 cycles.

Gloss:
100 Gardner Units (60° gloss)

Minimum Application Temperature:
50°F (10°C)

Service Temperature:
-40°F to 176°F (-40°C to 80°C)

Average Outdoor Durability:
Not recommended.

Chemical Resistance:

REAGENT
7 DAY IMMERSION
DIP TEST
30% Sulfuric Acid
NE
NE
10% Sulfuric Acid
NE
NE
30% HCI
NE
NE
10% HCI
NE
NE
50% NaOH
NE
NE
10% NaOH
F
NE
Methyl Ethyl Ketone
F
F
Acetone
F
NE
1,1,1-Trichloroethane
F
F
Methanol
NE
NE
IPA (Isopropanol)
F
NE
ASTM #3 Oil
NE
NE
SAE 20 Oil
NE
NE
Alconox®
F
NE
Toluene
F
F
Mineral Spirits
F
NE
Glacial Acetic Acid
F
F
5% Acetic Acid
NE
NE
Diesel Fuel
F
NE
Heptane
F
NE
Cellosolve Acetate
F
F
Conc. Ammonia
NE
NE
10% Ammonia
NE
NE
Turpentine
F
NE
Kerosene
F
NE
Water
NE
NE
Gasoline
F
F
NE = No Effect
NT = Not Tested
F = Failed (affected Sample)

7 Day Immersion: Immersed in reagent for 7 days.
Dip Test: Five 10 minute dips in reagent with 30 minute recovery.

Shelf Life:
1 year when stored at 70°F (21°C) and 40% to 50% R.H.





Trademarks:
Alconox® is a registered trademark of Alconox Co.
GraphicsPro™ is a trademark of Brady Worldwide, Inc.
Signmark® is a registered trademark of Brady Worldwide, Inc.
ASTM: American Society for Testing and Materials (U.S.A.)
PSTC: Pressure Sensitive Tape Council (U.S.A.)
SAE: Society of Automotive Engineers (U.S.A.)
All S.I. Units (metric) are mathematically derived from the U.S. Conventional
Units.

Note: All values shown are averages and should not be used for specification purposes.
Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.


WARRANTY
Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

Copyright 2007 Brady Worldwide, Inc. | All Rights Reserved
Material may not be reproduced or distributed in any form without written permission.

Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289
Email This Page
Copyright 2009 Brady Worldwide, Inc.